Marvel Industrial Coatings Blog

We are the premier provider of polyurea spray-on liners and industrial coatings.

Contact Us

The Best Spray Foam Equipment Around

← Back to List
Spray foam can be a real life saver for those home or work projects. Polyurea is the perfect match for all your insulation needs. Along with determining what type of spray foam you need, you also need to consider equipment. It is important that your spray foam equipment is a match for the task at hand.

At Marvel Industrial Coatings, customers can build their own spray foam equipment system. If that isn't your style, then we still have you covered. Customers are also able to choose from a variety of our customized coating systems.

We know that choosing the right equipment can be a daunting job. That's why we have made it easy for you and compiled a list of the best equipment we offer.

Read below to learn which spray foam equipment we recommend for your specific needs.

Reactor E-10hp (Best Spray Foam Equipment for Low Production Jobs)

Let's start with the basics. As an entry-level system, the Reactor E-10hp offers high portability and is affordable. We recommend this spray foam equipment for any small to medium size projects. Consider using the Reactor E-10hp to seal a pool lining, truck bed liner, balcony, or terrace.

This lightweight system can "boost heat" which allows your spray foam to heat up much sooner. This model has a start-up time of twenty minutes! Its "boost heat" comes from the power within its motor circuit. Usually, this power would go unused.

Yet, in the Reactor, this power transmits to additional heater rods within the tank. This power reaches higher temperatures much faster than other spray foam equipment systems.

We love how easy to use this Reactor is. It features digital heat controls, allowing you to directly input your needed temperature.

Also, the Reactor is built with a single knob motor. This allows you to quickly shift between gears without any inconvenience.

Another convenience factor in this spray foam equipment is its portability. It can fit through standard door frames and it does not require a generator.

Reactor 2 E-XP2 (Best Spray Foam Equipment for Medium Production Jobs)

The next piece of equipment that tops our list is the Reactor 2 E-XP2. We like to think this system is the future of spray foam equipment. Its advanced technology provides support in areas that other systems haven't focused on.

The Reactor 2 is designed with business owners in mind. With this equipment, you have more insight and control over your projects. This spray foam equipment tracks, monitors, and saves job log data. Also, with the Reactor 2, you are able to save data and recipes for future projects.

Users are able to store this data by uploading onto smartphones, laptops, or tablets. All you need is a USB drive to upload.

Take advantage of the InSite Remote Reporting Technology. Use this to gain real-time access to daily spray foam projects. You are also able to view this from your mobile devices and laptops.

You will have fewer complications as this Reactor's digital screen provides troubleshooting options.

We know you don't want to risk damaging your spray foam equipment. Yet, we know how easy an excessive power spike can happen.

That is why we offer a sacrificial surge protector that lets you get back to work when these spikes happen.

We offer a three-year warranty on the Reactor 2.

Reactor 2 H-XP2 (Best Spray Foam Equipment for High Production Jobs)

The Reactor 2 H-XP2 is a part of our Hydraulic Series. This series of equipment produces much more yield than other Reactors.

Just like the Reactor 2 E-XP2, this spray foam equipment also features advanced digital capabilities. Make use of the InSite Remote Reporting Technology and advanced display screen.

Its display screen is conveniently located above the pump. With this, you will not have to constantly bend and reach in uncomfortable positions.

This Reactor is tailored for projects that require mass output. This equipment's production levels are much higher than other Reactors.

When purchasing new spray foam equipment, durability is a must! This equipment has the longest life out of our other Reactors.

Also, it does not require as much maintenance as other equipment, so you can move on with projects sooner. This decreases the amount of service required to continue using the 2 E-XP2.

This Reactor is best suited for in-plant projects or building constructions or renovations.

Build Your Own Spray Foam Equipment

We don't mean to brag... but our Build Your Own option pretty great.

No matter what project you need your spray foam equipment for, we can make it happen. That's because your system will be customized to fit your specific needs.

You, as the customer, will decide on the appearance and features of your system. We guide our buyers through a six-step process.

You will be able to choose whether you want an air, hydraulic, or electric model.

Next, we have to ask- how hot? Pick the pressure ratings of your heated hoses and whip hose. Both have a pressure rating of 2000 psi or 3500 psi.

After you decide on your hoses, you will get to choose your gun. We offer air-purge, mechanical-purge, and liquid-purge.

We offer two additional features: a supply pump and agitator kit.

A supply pump can assist with your mounting needs. We offer a drum-mount and a wall-mount.

An agitator kit is great to have when coating as it reduces the material frosting. This allows the resin to have a more consistent look.

We love these four options but we invite you to check our extensive line of spray foam equipment. Marvel Industrial Coating is dedicated to providing you with the best service and maintenance for your new system.

Are you unsure of which model would best suit your needs? Don't fret! Our trained staff is here to help.

We will listen to what you are looking to do and any requirements you may have. Let us guide you through this buying process by offering our professional recommendations. Contact us today to inquire about your new spray foam equipment!